Моторное масло

Серия Mobilmet™ 420

Универсальные смазочно-охлаждающие жидкости серии Mobilmet™ 420 позволяют избежать проблем, связанных со взаимным загрязнением, что способствует повышению производительности и уменьшению количества брака.

Mobilmet 420 Series products are high-performance multi-purpose cutting oils. They are chlorine-free, non-staining and non-corrosive. They are designed for light to moderate duty cutting operations and they are also suitable as machine tool lubricants and for use in light duty hydraulic systems. They are formulated from high quality base oils and select additives to provide effective machining performance in a wide variety of operations of both ferrous and non-ferrous metals. The oils are light-colored and transparent so that the work area can be clearly seen at all times. The Mobilmet 420s are formulated to prevent the formation of oil mist in the vicinity of the machine tool.

Mobilmet 420 Series fluids are resistant to foaming, even with excess splashing so that superior performance is provided in the machine tool lubrication system. With relatively low pour points and high viscosity indexes, they are not difficult to dispense in cold conditions and provide adequate film strength in hot-running machine tool bearings under load.

Информация о серии продуктов

{0} предлагает {1} классов вязкости смазочных материалов.

Технические ресурсы

Не содержащие хлор смазочно-охлаждающие жидкости без примесей | Mobil™

Изменения конструкций станков, охрана здоровья и осознание экологических проблем ограничивают использование хлорсодержащих смазочно-охлаждающих жидкостей и добавок.

Технические разделы, PDF

Features and Benefits

In addition to their machining performance characteristics, the Mobilmet 420 Series fluids are multi-purpose in nature which helps reduce the problems associated with cross-contamination, thus improving production and reducing rejects. They are formulated using chlorine-free additives reducing the environmental impact of disposal and spillage. The Mobilmet 420 Series fluids control built-up edge and protect the tool tip from wear. They provide improved surface finish that may eliminate the need for finish turning or forming before grinding.

Features and potential benefits of Mobilmet 420 products include:

FeaturesAdvantages and Potential Benefits
Excellent machining performanceIncreased production resulting from longer tool life and reduced downtime for tool changes and wheel dressing
 Improved surface finish and dimensional accuracy resulting in fewer rejects and better quality finished products
 Helps increase feed rates and machine speeds
Suitable for a wide range of ferrous and non-ferrous metals and machining operationsFewer cutting oils required, potential for reduced inventory costs
Multi-service capabilityEliminates cross-contamination problems and provides further inventory benefits
Light, transparent colorProvides a clear view of the work area at all times



Mobilmet 420 Series fluids are recommended for a wide range of machining operations on all types of metals. They can be used as multi-purpose oils when a common fluid is required for machine tool lubrication and as a hydraulic fluid assuming proper viscosity selection.

  • Mobilmet 423 and Mobilmet 424 are recommended for machining aluminum, magnesium and copper, brasses and bronzes and, in addition, are recommended for steels and cast irons having a Brinell hardness up to 200. They can be used for severe cutting operations of difficult-to-machine non-ferrous alloys such as silicon-copper, silicon-bronze and copper-nickel. They are very effective lubricants for the machine tool lubrication system under a wide range of temperature conditions
  • Mobilmet 426 and Mobilmet 427 are recommended for critical machining of non-ferrous metals and automatic operations on materials having a Brinell hardness up to about 300


Typical Properties

Mobilmet 420 Series423424426427
Viscosity, ASTM D 445    
cSt @ 40º C15233246
cSt @ 100º C3.
Pour Point, ºC, ASTM D 97-15-15-15-12
Flash Point, ºC, ASTM D 92182200210212
Specific Gravity @15º C kg/l, ASTM D 12980.8590.8620.8740.877
Copper Strip Corrosion, ASTM D 130, 3 hrs @ 100º C1B (max)1B (max)1B (max)1B (max)


Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.